| 1. |
ABD-4J7A |
Demonstrate rigging and unrigging a bosun's chair  |
| 2. |
ABD-4J9A1 |
Marlinspike seamanship - knots I |
| 3. |
ABD-4J9A2 |
Marlinspike seamanship - knots II |
| 4. |
ABD-4J9A3 |
Marlinspike seamanship - splicing |
| 5. |
ABD-4J9A4 |
Marlinspike seamanship - line handling |
| 6. |
ABD-5J10B |
Demonstrate use of a safety harness |
| 7. |
ADB-4J11A |
Trace out and describe a piping system |
| 8. |
OICNW-1-1A |
Adjust a sextant |
| 9. |
OICNW-1-1B |
Measure the altitude of the sun |
| 10. |
OICNW-1-1C |
Obtain a celestial fix  |
| 11. |
OICNW-1-1D |
Measure the altitude of the sun at meridian passage (local apparent noon) |
| 12. |
OICNW-1-1E |
Celestial running fix |
| 13. |
OICNW-1-1F |
Star Fix |
| 14. |
OICNW-1-1G |
Measure the altitude of at least 3 stars |
| 15. |
OICNW-1-2A |
Fix by two bearings |
| 16. |
OICNW-1-2B |
Fix by two ranges |
| 17. |
OICNW-1-2C |
Fix by tangent bearings of two identified objects |
| 18. |
OICNW-1-2D |
Plot the ship’s DR position |
| 19. |
OICNW-1-2E |
Determine course to steer |
| 20. |
OICNW-1-3A |
Correction of charts and publications |
| 21. |
OICNW-1-3B |
Chart selection |
| 22. |
OICNW-1-3C |
Route planning |
| 23. |
OICNW-1-4A |
Position fix by GPS |
| 24. |
OICNW-1-4B |
Use of GPS position save function |
| 25. |
OICNW-1-4D |
Use of echo sounder |
| 26. |
OICNW-1-5A |
Determine gyro compass error by bearing of range |
| 27. |
OICNW-1-5B |
Determine magnetic compass error |
| 28. |
OICNW-1-5C |
Determine magnetic compass deviation |
| 29. |
OICNW-1-5D |
Determine course to steer by magnetic compass |
| 30. |
OICNW-1-5E |
Position fix by magnetic compass bearings |
| 31. |
OICNW-1-5F |
Azimuth of the sun |
| 32. |
OICNW-1-6A |
Steering gear test |
| 33. |
OICNW-1-6B |
Set weather controls |
| 34. |
OICNW-2-1A |
Identify light configurations |
| 35. |
OICNW-2-1B |
Identify day shapes |
| 36. |
OICNW-2-1C |
Identify sound signals |
| 37. |
OICNW-2-1D |
Determine risk of collision |
| 38. |
OICNW-2-1E |
Maneuver to avoid risk of collision -- meeting |
| 39. |
OICNW-2-1F |
Maneuver to avoid risk of collision -- overtaking |
| 40. |
OICNW-2-2A |
Watch relief |
| 41. |
OICNW-2-2B |
Keep a safe navigation watch |
| 42. |
OICNW-2-2C |
Notify Master when appropriate |
| 43. |
OICNW-2-2D |
Keep a safe anchor watch |
| 44. |
OICNW-2-2E |
Navigate in restricted visibility |
| 45. |
OICNW-2-2F |
Turn over a watch |
| 46. |
OICNW-2-3A |
Voyage plan - appraisal |
| 47. |
OICNW-2-3B |
Voyage plan - execution |
| 48. |
OICNW-2-3C |
Watch augmentation |
| 49. |
OICNW-2-3D |
BRM Condition III – collision avoidance. |
| 50. |
OICNW-2-3E |
BRM Condition III – navigation |
| 51. |
OICNW-2-3F |
BRM Condition II or III – error trapping |
| 52. |
OICNW-2-3G |
BRM Condition II or III – navigation and collision avoidance |
| 53. |
OICNW-2-3H |
BRM Condition III – establish a bridge team |
| 54. |
OICNW-2D1E |
Maneuver to avoid risk of collision - crossing |
| 55. |
OICNW-2D3B |
Voyage plan - preparation |
| 56. |
OICNW-2D4A |
Situational awareness |
| 57. |
OICNW-2D6A |
Vessel traffic systems (VTS) |
| 58. |
OICNW-2D7E |
BRM Condition II or III - prioritization |
| 59. |
OICNW-3-1A |
Set up and maintain radar display |
| 60. |
OICNW-3-1B |
Switch display modes |
| 61. |
OICNW-3-1C |
Identify false echoes, sea return, racons and SARTs |
| 62. |
OICNW-3-1D |
Determine range and bearing |
| 63. |
OICNW-3-1E |
Determine risk of collision |
| 64. |
OICNW-3-1F |
Determine DRM, SRM, CPA, and TCPA |
| 65. |
OICNW-3-1G |
Detect speed and course changes of other ships |
| 66. |
OICNW-3-1H |
Change course to control target DRM |
| 67. |
OICNW-3-1I |
Change speed to control target DRM |
| 68. |
OICNW-3-1J |
Determine true course and speed of target vessels |
| 69. |
OICNW-3-1K |
Parallel indexing |
| 70. |
OICNW-3-2A |
Set up and maintain an ARPA display |
| 71. |
OICNW-3-2B |
Manual target acquisition |
| 72. |
OICNW-3-2C |
Establish an exclusion area |
| 73. |
OICNW-3-2D |
Set vector characteristics |
| 74. |
OICNW-3-2E |
Designate targets |
| 75. |
OICNW-3-2F |
Cancel targets |
| 76. |
OICNW-3-2G |
Target history |
| 77. |
OICNW-3-2H |
Establish CPA and TCPA |
| 78. |
OICNW-3-2I |
Establish alarm area |
| 79. |
OICNW-3-2J |
Trial Maneuver |
| 80. |
OICNW-3-2K |
Switch stabilization modes |
| 81. |
OICNW-3-2L |
Navigation lines |
| 82. |
OICNW-3-2M |
Determine set and drift |
| 83. |
OICNW-3-3A |
Operational Settings - Safety Depth |
| 84. |
OICNW-3-3B |
Operational Settings - Display/Change Safety contour |
| 85. |
OICNW-3-3C |
Operational Settings - Display/change CPA/TCPA limits |
| 86. |
OICNW-3-3D |
Operational Settings - Display/Change spot sounding limits |
| 87. |
OICNW-3-3E |
Operational Settings - Resume of Navigation Mode |
| 88. |
OICNW-3-3F |
Monitoring Sea Area - Chart Scaling |
| 89. |
OICNW-3-3G |
Monitoring Sea Area - Chart selection |
| 90. |
OICNW-3-3H |
Monitoring Sea Area - Gain information |
| 91. |
OICNW-3-3I |
Monitoring Sea Area - ERBL |
| 92. |
OICNW-3-3J |
Display User Charts |
| 93. |
OICNW-3-3K |
Merge User Charts |
| 94. |
OICNW-3-3L |
Display Route Plans |
| 95. |
OICNW-3-3M |
Modify Waypoints |
| 96. |
OICNW-3-3N |
Check revised route for safety |
| 97. |
OICNW-3-3O |
Convert Route Plan to Passage Plan |
| 98. |
OICNW-3-3P |
Convert Route Plan to a Route |
| 99. |
OICNW-3-3Q |
Environmental Data - Identify tidal data |
| 100. |
OICNW-3-3R |
Environmental Data - Display tide bars and current vectors |
| 101. |
OICNW-4-1A |
Flashing Light |
| 102. |
OICNW-5-1A |
Maneuver for man overboard |
| 103. |
OICNW-5-1B |
Course change of more than 45° |
| 104. |
OICNW-5-1C |
Emergency stop |
| 105. |
RFPNW-1K |
Helmsman |
| 106. |
RFPNW-2K |
Lookout |
| 107. |
RFPNW-3K4A |
Relief of the lookout |
| 108. |
RFPNW-3K4B |
Relief of the helmsman |
