OICEW Task 8.1.B

Welding projects

MMA Method

In order to satisfy NVIC 17-14 Task 8.1.B , MMA students must:

NVIC Method

See NVIC method.

STCW Competence Knowledge, Understanding, and Proficiency

Appropriate use of hand tools, machine tools and measuring instruments for fabrication and repair on board

OICEW-C1 Materials used in construction and repair of ships and equipment

Fabrication and repair

Fabrication and repair of systems and components

Safe working practices

Safety measures to ensure a safe working environment and for using hand tools, machine tools and measuring instruments

Use of hand tools, machine tools and measuring instruments
Condition Behavior Standard

On a vessel of at least 1,000 HP, or in a laboratory or workshop,

the candidate performs several electric arc welding processes.


All The assessment is required for all OICEW endorsements regardless of any limitations for propulsion mode and/or vessel equipment.

The candidate, for each weld listed below:

  1. Prepares required pieces of metal prior to welding;

  2. Selects the proper machine settings and electrode for the size and material to be joined; and

  3. Performs a post-weld examination and/or test.

Fillet welds

  • Flat plates;
  • Vertical plates (at right angles); and
  • Horizontal [flat] pipe (end-to-end).

Groove welds

  • Flat plates;
  • Vertical plates (at right angles); and
  • Horizontal [flat] pipe (end-to-end).