NVIC 17-14 Task 5.2.D

Operate fuel, lubrication, ballast and other pumping systems and associated control systems

OICEW-A5.2 Operation of pumping systems:

Operation of bilge, ballast and cargo pumping

On a vessel of at least 1,000 HP, on a simulator, or in a laboratory,

the candidate plans for and pumps out the engine-room bilge wells.

The candidate performs the following actions, and describes them as they are performed:

1. Sounds the bilge-water collecting tank to ensure it is capable of accommodating bilge water without overflowing;

2. Lines up the bilge system to take a suction from the desired bilge well, and discharges to the bilge-water collecting tank;

3. Primes the bilge pump as necessary;

4. Starts the bilge pump;

5. Monitors the bilge-pump suction and discharge pressure gauges to ensure the bilge pump has picked up suction;

6. Monitors the bilge pocket level;

7. Stops the bilge pump when the bilge pocket has been pumped dry;

8. Restores the bilge system valve line up to normal;

9. Properly fills in information in the Oil Record Book; and

10. Takes proper action to prevent safety and pollution violations.