MMA Assessment OICEW-2-1C

Condition

In a workshop/laboratory or other safe working environment, given a hand die, proper tools, lighting, ventilation, and steel round stock or pipe of no less than 3/8 inch diameter.

Performance requirement

Behavior	Standard
Plan to make an external thread on 1/2” pipe
Use tools to Fabricate an external thread on the 1/2” pipe with the axis of the pipe and thread co-linear	Use: tape measure pipe cutter pipe reamer cutting oil 1/2” hand pipe die

Behavior

Standard

The student will:

During assessment, the student shall, at a minimum:

Plan to make an external thread on 1/2” pipe

Use tools to Fabricate an external thread on the 1/2” pipe with the axis of the pipe and thread co-linear

Use:

tape measure
pipe cutter
pipe reamer
cutting oil
1/2” hand pipe die

Location

Assessed in ST‑0999E Sea Term I (Engineering Portion).

References

Table A-III/1 OICEW-C1.6
NVIC Task

Project diagram:

See the Assessment Guidelines for additional specifications of behavior and standards.