OICEW Task 8.1.A

Machine shop projects

MMA Method

In order to satisfy NVIC 17-14 Task 8.1.A , MMA students must:

NVIC Method

See NVIC method.

STCW Competence Knowledge, Understanding, and Proficiency

Appropriate use of hand tools, machine tools and measuring instruments for fabrication and repair on board

OICEW-C1 Materials used in construction and repair of ships and equipment

Fabrication and repair

Fabrication and repair of systems and components

Safe working practices

Safety measures to ensure a safe working environment and for using hand tools, machine tools and measuring instruments

Use of hand tools, machine tools and measuring instruments
Condition Behavior Standard

On a vessel of at least 1,000 HP, or in a laboratory or workshop,

the candidate uses hand and machine tools to fabricate two useful items from the following list, to the satisfaction of, and with tolerances specified by, the assessor.


All The assessment is required for all OICEW endorsements regardless of any limitations for propulsion mode and/or vessel equipment.

The candidate plans and fabricates:

  1. One of the following:

    a. Plumb bob;

    b. Bolt – either SAE or metric – with hex head;

    c. Threaded pipe nipples and “bell” reducer;

    d. Parallel clamp; or

    e. Similar item that may be required on board as directed by the assessor; and

  2. One of the following:

    a. Screw jack;

    b. Coupling, pipe thread-to-flare tubing – any size;

    c. Pump shaft;

    d. Valve stem; or

    e. Similar item that may be required on board as directed by the assessor.