OICEW-1-1B
Form two steel plates using brazing process
Function: Maintenance and repair at the operational level
| Competence | Knowledge, Understanding & Proficiency | Task |
|---|---|---|
|
Appropriate use of hand tools, machine tools and measuring instruments for fabrication and repair on board |
C1.6 Use of hand tools, machine tools and measuring instruments |
Form two steel plates using brazing process |
Assessed in: EN-2112 Machine Tool Technology
Condition
In a workshop/laboratory or other safe working environment, given proper tools, lighting, ventilation, and two steel plates of no less than 1/8 inch thickness.
Behavior
Plan, prepare and form two steel plates with a fillet joint design using the brazing process and describe actions as they are being performed.
Standard
- All required equipment is set up and job is properly laid out;
- Candidate selects correct flux material and proper heat;
- Plates are formed according to plan and finished has no evidence of lack of fill, flux entrapment, non-continuous fillet, base metal erosion, base cracks or other defects;
- Actions being executed are described correctly as they are being performed;
- No safety violations are observed.
