| The expected outcome is that the student... |
Supports STCW elements... |
TOPIC - Governor for diesels
- Understands the operation and adjustments to speed and load regulating
devices.
- Defines terms associated with governors.
- Understands overspeed protection devices
|
31A6.1.13
|
TOPIC - Engine lubrication oils and systems
- Understands the requirements of the classification of and the production of
lubricating oils.
- Knows the various types of lubricating systems, filters, filtering media,
bearing lubrication and mechanical, self-cleaning centrifuges.
|
31A6.1.14
|
TOPIC - Engine cooling systems and coolants
- Understands the necessity of engine cooling for proper operation.
- Understands the requirements of the system and the coolants.
- Knows the arrangement of the components and the operation of the cooling
system.
|
31A6.1.14
|
TOPIC - Air intake and supercharging
- Understands the requirements of the air filter system, the types of filtering
systems and the relationship of the scavenging air and turbo chargers to the air
supply system on both 2 and 4 stroke engines.
- Knows proper operation and maintenance of such systems.
|
31A6.1.13
|
TOPIC - Exhaust systems
- Understands the function of the exhaust system, including turbochargers, and
its relationship to proper engine operation.
- Describes co-generation systems using exhaust gas energy and study automatic
fired boilers.
|
31A6.1.13
|
TOPIC - Starting and reversing systems
- Explains the design and operation of indirect and direct air starting
systems.
- Understands construction of as well as operation of reverse/reduction gears
and reversing systems as installed on large-bore engines
|
31A6.1.13
31A4.5.1
|
TOPIC - Drivetrains
- Understands the construction and operation of hydraulic, electrical and
pneumatic couplings.
- Explains the construction and operation of fluid, resilient and inertia
dampers.
- Understands design and operation of thrust bearings and controllable pitch
propellers
|
31A6.1.13
|
TOPIC - Trouble shooting
- Explains the value of a step by step procedure in looking for faults.
- Understands troubleshooting charts and procedures.
|
31A6.4.2
31B1.4.1
|
LAB - Speed and load regulating governors
- Make the necessary corrections and adjustments so as to properly "tune" a
governor to specific loads and sensitivity conditions.
|
31C1.3.1
|
LAB - Construction details of EMD medium speed engine
- Properly use general hand tools, and special application tools
- Safely rig and lift heavy engine components
- Remove, inspect of and reinstall cylinder and connecting rod assembly.
|
31C1.3.1
31A2
31C1.3.5
|
LAB - Small vessel general arrangement, start up
- Starts the Towline engine room equipment and the machinery to support safe
navigation from a "dead ship" condition to "on line" and ready to leave the dock.
|
31A6.1.15
|
LAB - Starting Devices
- Demonstrates the operation and construction of electrical, pneumatic and
hydraulic starting motors, including methods of engagement, regulations.
|
31A6.1.13
|
LAB - Emergency generator
- Understand the requirements of the emergency generator as a power supply.
- Demonstrates the arrangement of the emergency switchboard including bus
transfer equipment.
- Starts and tests the emergency generator.
|
31B1.1.1
31B1.1.2
31B1.2.2
|
LAB - Cooling and lubrication systems
- Understands the function of various components in the cooling and lubrication
systems by actual observation of the units and bench simulation of operation.
|
31A6.1.14
|
LAB - Electrical installations
- Performs installations of electrical wiring systems on existing engines.
- Troubleshoots electrical systems with installed faults.
|
31B1.3.1
31B1.4.1
|